Knowledgebase
Enterprise Supply > Help Desk > Knowledgebase

Ask a question:


How to Apply… BacKrete® Eco-Friendly & Waterless Concrete Cleaner

Solution

How to Apply… BacKrete® Eco-Friendly & Waterless Concrete Cleaner

A small amount of BacKrete® Eco-Friendly & Waterless Concrete Cleaner spread thinly over concrete on a weekly basis will eat oil stains.

IMPORTANT: BacKrete® will eat oil, but not dirt. Wirebrush any area which may have a heavy build-up of dirt and oil, and remove before applying BacKrete®.

DO NOT mix water with BacKrete® Eco-Friendly & Waterless Concrete Cleaner. The bacteria in BacKrete® obtains the water it needs from the latent moisture content of concrete, natural rain and dew, and automotive air conditioning condensation.

Step 1

Bend down to the concrete and drag the measuring cup along the concrete surface in front of the BacKrete® Applicator, creating a 2″ by 36″ line of powder.


Step 2

Spread with the Applicator flat on the concrete surface. This will push the BacKrete® Powder into the concrete’s pores. Spread the BacKrete® down the length of the stained “Drip Zone”. Then rotate the Applicator 180 degrees, and spread back in the opposite direction.


Step 3

Brush the applicator back and forth across the product at 90 degress to the direction of brushing in Steps 1 and 2.

Spread, Spread, Spread until the product is thinly and evenly applied, and you will see the oil stains begin to turn white.


One 8 oz. cup contains enough BacKrete® to cover one side of an oil stained “Drip Zone” in a normal fuel pump area.

• Automotive Drip Zone: 2-4 ounces.
• Diesel Drip Zone: 4-8 ounces.

 
Was this article helpful? yes / no
Article details
Article ID: 1
Category: Products
Date added: 2012-08-20 19:57:03
Views: 334
Rating (Votes): Article rated 3.2/5.0 (27)

 
« Go back

 
Powered by Help Desk Software HESK - brought to you by Help Desk Software SysAid